Preset Forward Timer (Incoming Call To A Destination) - Vodavi STARPLUS STSe Operation Manual

2-42
Features and Operation

Preset Forward Timer (Incoming Call to a Destination)

Description
The Preset Forward Timer determines the time an outside line rings before being forwarded
to a predetermined destination as programmed in FLASH 40, Page C, Button #8. If a forward
destination is programmed in the CO line field, the CO calls forward to that destination after
the CO preset forward timer expires. This forward occurs regardless of how many stations the
line is ringing.
This feature applies to initial CO ringing lines only and works with Preset Forward CO Line
assignments. The CO Line Preset Forward Timer setting is variable from 00-99 seconds. A [00]
entry disables the timer and the feature is disabled.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press Button #21 to select Page C. The display updates. The following message displays to
indicate current programming of that line or group of lines:
4. Press the PRESET FWD TIMER flexible button (Button #8). The following message
displays:
5. Enter valid number on dial pad which corresponds to 00–99 seconds.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... CO Line Preset Forward Timer is set at 10 seconds.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE C
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
P R ES E T F W D T I M ER
1 0
Call Forward - Preset
00-99
August 2005