Vodavi STARPLUS STSe Operation Manual page 160

2-136
Features and Operation
To clear an entry:
1. Press the CLEAR flexible button (Button #3).
2. Press HOLD to save the entry. A confirmation tone sounds and the display updates. The
entry is erased (both the BIN/ICM assignment and the programmed name).
Clear – Entries in the table may be erased and cleared which allows placement of another
entry into the list. When a system speed dial bin is deleted or changed, the name
associated to the bin must also be erased. When a multiple table listing is associated to
one system speed dial bin it may be necessary to clear more than one entry.
Operation
To view the Directory List:
1. Dial the Directory List dial code [680] on the dial pad,
-or-
Press flexible button programmed as a directory dialing button.
-or-
Use the Soft Key's DIR-DIAL option when in an idle condition.
2. Press a button on the keypad, once, twice or three times, that represents the letter of the
alphabet to begin viewing the list of names (e.g., when 2 is first pressed, it produces
names starting with A. When 2 is pressed a second time, names that start with B display.
Pressing 2 a third time displays names that start with C). The alphabet is represented on
the keypad as shown below.
Names beginning with the letter chosen display on the LCD display.
STARPLUS STSe - Programming & Operations Manual
A = 2
B = 22
C = 222
P Q R S
Figure 2-8: Directory Dialing Keypad Map
If there are no names in the Directory List beginning with the desired letter, a
name with the next higher letter displays on the LCD display.
The letters "Q" and "Z" are not marked on many telephone keypads; however,
the illustration above shows the correct keys used to access these letters.
A B C D E F
1 2 3
G H I J K L M N O
4 5 6
T U V W X Y Z
7 8 9
O P E R
#
*
0
Directory Dial
August 2005