Programming System Functions Via Computer - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems
Hide thumbs Also See for STARPLUS STSe:
Table of Contents

Advertisement

D-8
Hard Drive-Based Voice Mail

Programming System Functions Via Computer

Before You Begin
PC Specifications
Consider the following specifications for the PC that will be connected to the voice mail
system and running the In-Skins Admin program.
Memory
Drives
PC
Connectors
PC Accessibility
You can perform administrative functions using a laptop or PC that is connected directly to
the voice mail system.
»
To connect the voice mail system to a PC, a straight-through cable is required.
»
Make sure the voice mail system is running before starting the In-Skins Admin program.
(You can verify this by dialing a port number to see if a connection is made, or by
checking the Hard Drive-based Voice Mail card to see if two of the three green LEDs are lit.)
»
To install the In-Skins Admin program, run the setup routine on the software CD provided.
»
Once the In-Skins Admin program is installed, the Integration wizard will help you connect
to the voice mail system. You will need a mailbox number and password to log in: use
mailbox 100 and password 0000.
Powering Up the System -- When the STSe KSU is powered up, the Hard Drive-based Voice Mail
system will also start. From the time the voice mail card is powered on, it will take about 4
minutes before the system is ready to process calls or to perform remote maintenance.
Shutdown/Reset Warning -- Before turning off the KSU or resetting the Hard Drive-based Voice
Mail card, you should always attempt to "shutdown and park" the voice mail system using
either a digital telephone or the In-Skins Admin program. For more details on this feature,
refer to
"Shutdown Wizard" on page
Voice Mail Station Numbers -- By default, the Hard Drive-based Voice Mail system uses station
numbers 150-157. For best results, allow all voice mail ports to remain in Voice Mail Group
440 as configured at the factory.
PC/Laptop Administrator Login -- To access the voice mail system as an administrator, ... enter
the system defaults which are: mailbox number 100, and password 0000.
STARPLUS STSe - Programming & Operations Manual
128 MB RAM (PC133) on
board -2.5" form factor
EIDE (ATA100) Hard Drive
CD-Rom Drive
PS2 keyboard connector
PS2 mouse connector
2 USB connectors
RS232 DB9 male connector
- for admin/diagnostic
D-12.
Programming the Voice Mail System
Monitor
VGA circuitry (800x600)
- with 15-pin connector
Keyboard &
PS2 models
Mouse
Operating
Windows XP or
System
Windows 2000
August 2005

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents