Vodavi STARPLUS STSe Operation Manual page 190

2-166
Features and Operation
To assign a CO Line Button:
Enter [BB], [1], [LLL], [HOLD]
BB = Desired Flexible Button Number
LLL = CO Line Number
Buttons assigned as specific CO lines provide direct access and appearance of the CO line
at a station. The station receives call status indications such as LED flash rates for
incoming ringing when the line is placed on HOLD, etc. CO Line ringing is programmed in
CO Line Attribute programming.
To assign a Loop Button:
Enter [BB], [2], [HOLD]
BB = Desired Flexible Button Number
Used for a station without direct CO line appearance to answer the line ringing in or
transferred to the station. It is recommended that all stations be given a loop button so
they can receive a transferred call on a line for which they have no button access.
To assign a Pool Group Button:
Enter [BB], [3], [GG], [HOLD]
BB = Desired Flexible Button Number
GG = Line Group Number (00-23)
Some or all outside CO lines may be grouped together and accessed via a POOL button
for the purpose of placing an outgoing CO call. Pressing this button accesses the highest
numbered unused CO line in that CO line group.
To assign a function to a Flexible Button (admin programmable):
Enter [BB], [4], [XXX], [HOLD]
BB = Desired Flexible Button Number
XXX = Desired Flexible Feature Code
Refer to
To unassign (lock out) a button:
Enter [BB], [#], [HOLD]
BB = Desired Flexible Button Number
SINGLE LINE TELEPHONE
To assign an Off-Hook Preference function for an SLT:
After completing the first five steps of Flash 50/51, Page B, Button #11 programming
described earlier in this section, continue programming using one of the following options.
To assign a CO Line access function:
Enter [01], [1], [LLL], [HOLD]
LLL = CO Line Number
STARPLUS STSe - Programming & Operations Manual
"Default Numbering Plan" on page F-16
The [XXX] entry implies that you add any additional information required for
the function as described in the Default Numbering Plan. For example, to
assign a speed dialing function to a button, you enter the feature code 668
followed by the speed bin number.
Flexible Button Function Assignment
for a listing of flexible feature codes.
August 2005