Vodavi STARPLUS STSe Operation Manual page 527

Programming the Voice Mail System
Software Installation
To install the In-Skins Admin program on the Administrator's computer:
1. Place the In-Skins Admin software CD in the CD-ROM drive, it should launch automatically.
2. Once the CD loads, click the "Install" option. Certain program files will transfer to the PC.
3. When the "In-Skins Admin Setup" window appears:
Click on the "computer" icon to accept
the default directory (c:\Program
Files\IsAdmin),
-or-
Click on the "Change Directory"
button to select another location.
4. After choosing the file destination, the
necessary program files will be copied
to the directory you selected.
» » » When the installation is complete, restart the computer.
Starting the In-Skins Admin Program
During the installation routine for easy access, the In-Skins Admin program was placed on the
administrator's computer under Start>Programs>Inskins Admin. Each time you open the
program, the "Connection Wizard" will display the following connection options:
»
Direct via RS232 Cable
»
Remote System via Modem Call
»
Offline - Local Data
The voice mail system can be
administered locally or remotely, or you
can work offline to add multiple names
and station numbers.
Local STSe Site
For a local connection, use a "straight through" cable to connect the KSU to the serial port of
the laptop or PC where the In-Skins Admin program will be installed.
1. With the voice mail system up and running, start the In-Skins Admin program.
2. When the "Welcome" window displays, select Direct via RS232 Cable and click NEXT.
3. Type in a new system name, or select a name from the dropdown list, and click NEXT.
4. Select the appropriate COM port for
your system, then choose the proper
baud rate for your modem. The
default baud rate is 115200.
5. Enter a valid mailbox number and
password, then click FINISH to
connect to host system.
STARPLUS STSe - Programming & Operations Manual
D-9
Hard Drive-Based Voice Mail
August 2005