Direct Transfer Mode - Vodavi STARPLUS STSe Operation Manual

Direct Transfer Mode

Direct Transfer Mode
Description
An outside CO line can be transferred from one keyset to another. By using the TRANS
button, a screened (announced) transfer can be transferred directly to the handset on any
key station. Any number of attempts can be made to locate someone by calling different
keysets without losing the call. If a line is transferred to a busy station, it receives muted
ringing.
When enabled, supervised transfers (screened transfers) to stations in the handset mode
connect calls directly to the handset. The station user must have a direct appearance of that
CO line or a Loop button. This feature is programmed on a system-wide basis in admin
programming.
Programming Steps
1. Press the DIRECT TRANSFER flexible button (FLASH 06, Button #7). The following
message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Direct Transfer Mode is enabled.
STARPLUS STSe - Programming & Operations Manual
D I R ECT X FER
E N AB LE D
Features and Operation
0-1
2-133
August 2005