Program Mode Entry (Data Terminal Or Pc); Initialization - Vodavi STARPLUS STSe Operation Manual

E-6
Customer Database Programming
Program Mode Entry (Key Station)
Programming is performed at any 24-button Digital Display Terminal. Programming is always
done at this type of station regardless of the class of service or which station has been
assigned as the Attendant(s).
To enter the Program Mode:
1. Press the ON/OFF button (optional). LED lights and intercom dial tone sounds.
2. On the dial pad, press [ ][ ][3][2][2][6] (default password). A confirmation tone sounds.
3. The ON/OFF button LED is lit. The system is ready to program.
DEFAULT ... Station 100 programming only

Program Mode Entry (Data Terminal or PC)

A PC terminal connected to the RS-232C port on the MBU, or remotely through the 9600
baud modem, is used for database programming. When using a data terminal (ASCII or PC
capable of emulating an ASCII terminal) on-site or locally, to program the system:
1. Press <Enter> on the terminal.
2. Enter the password [default = 3226vodavi], and press <Enter> again. Proper entry of the
password results in the Adm> prompt. Proceed with programming referring to
on page E-4
the terminal, a Help screen displays.
When entering the system remotely via a PC, access to the modem is accomplished by
accessing Port 499 through a direct ringing assignment or through DISA or by being
transferred to Port 499.

Initialization

The system has been preprogrammed with certain features called default data (refer to
Table F-1 on page
To Return the Database to the System Default Values:
1. Place Switch #8 on BKSU to the ON position.
2. Turn the power off and on to initialize the system database to the default.
3. Once database is initialized (phone displays the station number), place Switch #8 in the
OFF position to protect the database.
STARPLUS STSe - Programming & Operations Manual
for terminal characters that represent the key set buttons. By entering [?] from
F-3). These features are loaded into memory when the system is initialized.
The system should be initialized when installed or at any time the database has
been corrupted.
Program Mode Entry (Key Station)
Figure E-1
August 2005