Tenant Groups; Enable/Disable The Tenant Groups Feature - Vodavi STARPLUS STSe Operation Manual

2-312
Features and Operation

Tenant Groups

Description
The Tenant Groups feature allows one STSe system to be used by up to 10 different
companies or agencies within a single building. Each Tenant Group can have up to 6
Attendants. By default, the first programmed station of Tenant Group 0 is an Attendant,
which is station 100.
Tenant Group 0 is the only Tenant Group that can use Flash 22 programming to assign its
own automatic day/night open and close schedule. Other Tenant Groups must manually
change between day/night/special by pressing the DND button.
Stations can place an intercom call to a station in any Tenant Group in the system. Stations
can also call an Attendant in another Tenant Group by dialing the appropriate station
number; however, dialing 0 will only ring the Attendant within the same Tenant Group as the
station that dials 0.
The following system features are assigned and changeable by the first programmed
Attendant of any Tenant Group. Coordination is necessary between Tenant Groups to
establish capability that supports the requirements of all groups.
Numbers programmed in system speed bins
Custom Messages (21-30)
Directory List Programming
Attendant CO Line External (Off-Net) Forward
Setting Time and Date
The following subsections describe programming and operations that are unique to Tenant
Groups. Refer to
Operations.

Enable/Disable the Tenant Groups Feature

Programming Steps
1. Press the MULTIPLE TENANT flexible button (FLASH 05, Button #17). The following
message displays:
2. Enter a valid number (0 or 1) on the dial pad.
[0] = Disabled
[1] = Enabled
3. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
DEFAULT ... Disabled.
STARPLUS STSe - Programming & Operations Manual
Chapter 3 for additional information on Attendant Programming and
M U LTI P L E T EN AN T S
0
0-1
Tenant Groups
August 2005