Lcr Class Of Service (Cos) - Vodavi STARPLUS STSe Operation Manual

B-16
Appendix B - Least Cost Routing
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press the FORCE LCR flexible button (Button #11). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

LCR Class of Service (COS)

Description
Stations can be given a class of service assignment for Least Cost Routing. The range is
between 0-6, with 0 being unrestricted and 6 the most restricted. A station can use LCR
routes with a priority number equal to or higher than the stations LCR COS assignment.
Stations are given unrestricted access (0).
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
STARPLUS STSe - Programming & Operations Manual
S XXX
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
FORCE LCR
D I S A B LE D
EN TE R S TAT I O N N U MBE R
Programming LCR Tables
Flash 51 - Flexible Numbers
PAG E A
0-1
Flash 51 - Flexible Numbers
August 2005