Vodavi STARPLUS STSe Operation Manual page 480

C-14
Flash-Based Voice Mail
To change the Operating Mode:
1. Access the System Administrator Mailbox as described on
Options menu plays.
2. Press [5] to Set Operating Mode.
3. After the prompt, press:
[1] to review data - the system will announce the current Mode and then you are returned
to the prompt that asks if you want to review data, change data, or exit.
-or-
[2] to change data - after the prompt, press:
[1] for Day Mode - choice is confirmed, then you return to prompt asking if you want
to review, change, or exit.
-or-
[2] for Night Mode - choice is confirmed, then you return to prompt asking if you
want to review, change, or exit.
-or-
[3] for Automatic Mode - choice is confirmed, then you return to prompt asking if you
want to review, change, or exit.
-or-
[ ] to exit - you are returned to the Administrator Options Menu.
4. When you finish Setting the Operating Mode, you have three choices:
Press [1] through [9] to select another System Administrator task to perform.
Press [ ] to return to the system Main Customer Call Routing (CCR) Menu.
Press [ ] + [ ] to exit the system completely.
Selecting PBX Integration
The Flash-based Voice Mail uses a set of pre-programmed PBX Integration screens. These
screens provide standard configurations for various PBX systems that might be used with the
Flash-based Voice Mail.
The current PBX Integration may be changed from the System Administrator Mailbox.
To change the PBX Integration:
1. Access the System Administrator Mailbox as described on
Options menu plays.
2. Press [6] to Select PBX Integration.
3. After the prompt, press:
[1] to review data - the system will announce the current PBX Integration and then you
are returned to the prompt that asks if you want to review data, change data, or exit.
-or-
[2] to change data - after the prompt, enter the desired two-digit Integration Number
(00 = Vodavi STSe 3 digit; 01 = Vodavi STSe 2 digit; 02 = Vodavi STSe 4 digit). You are then
returned to the prompt that asks if you want to review data, change data, or exit.
-or-
[ ] to exit - you are returned to the Administrator Options Menu.
STARPLUS STSe - Programming & Operations Manual
Programming the Voice Mail System
page C-7. The Administrator
page C-7. The Administrator
August 2005