Direct Station Selection / Busy Lamp Field - Vodavi STARPLUS STSe Operation Manual

2-132
Features and Operation
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... DISA CO-to-CO is enabled for all CO lines.
Operation
1. Call the phone number the system administrator specified as the DISA line. The system
answers and returns internal dial tone.
2. Enter the DISA access code specified by the system administrator, if applicable. Dial tone
returns.
To place an outgoing call:
1. Dial a group access code: 9, 801–823. CO Dial tone returns.
2. Dial the desired telephone number.
To reach an internal station:
Dial the desired station number. (Ringback tone sounds.)

Direct Station Selection / Busy Lamp Field

A user with Direct Station Selection (DSS) buttons assigned at their Key Station can call an
intercom station or transfer a CO call by pressing the appropriate DSS button.
When a button on a Digital Telephone is assigned as a DSS, it also serves as a Busy Lamp Field
(BLF) to display the status of that telephone. Refer to
page 2-163
STARPLUS STSe - Programming & Operations Manual
The conference timer monitors a DISA trunk-to-trunk call and release the lines
one (1) minute after the time expires.
If the station dialed is unattended, busy or in DND, intercom dial tone returns,
(after the Preset Call Forward Timer expires).
WARNING: Toll fraud can occur if DISA is not properly implemented.
for additional information.
Direct Station Selection / Busy Lamp Field
"Flexible Button Function Assignment" on
August 2005