Vodavi STARPLUS STSe Operation Manual page 114

2-90
Features and Operation
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press button #21. The display updates to reflect current programming for Page C.
Flash 50 - Fixed Numbers
XXX - XXX PAGE C
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
5. Press the SLT SUPERVISION button (Button #7). The following message displays:
6. Dial a valid number [0] to disable or [1] to enable SLT Loop Supervision.
7. Press HOLD to save the entry.
DEFAULT ... The SLT Loop Supervision setting is [1] (enabled).
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, all stations are selected.
SLT SUPER VISION
E N AB LE D
CO Line - Loop Supervision
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S XXX PAG E C
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-1
August 2005