CO Line - Loop Supervision
CO Line Loop Supervision - Forced Disconnect
Description
This feature ensures that when a party disconnects at the end of a call, the other party is
automatically disconnected from the line. This is useful in a system that is connected to a
Telco that provides loop supervision, but does not tear down the call. In this case, when the
feature is disabled, a dial tone is received by the remaining party - one who may not have
permission for outside line use.
Most Telco services do provide a disconnect. This disconnect sounds a tone to the remaining
party to positively indicate the disconnect. This is a desired function and consequently this
feature is normally left in its default disabled state.
Programming Steps
1. Press the LOOP SUP IN TALK flexible button (FLASH 05, Button #14).
2. Enter a valid number (0 or 1):
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... CO Line Loop Supervision - Forced Disconnect is disabled.
SLT Loop Supervision Programming
Description
Loop Supervision is used primarily with DISA, Voice Mail / Auto Attendant and with
unsupervised conference applications. It lets the system detect when loop current is broken
and an outside line is no longer being used. Loop supervision can be disabled on SLT lines so
that voice mail ports will drop calls when the outside party hangs up.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
STARPLUS STSe - Programming & Operations Manual
LO O P S U P I N TAL K
D I S A B LE D
EN TE R S TAT I O N N U MBE R
0-1
Flash 51 - Flexible Numbers
2-89
Features and Operation
August 2005