Vodavi STARPLUS STSe Operation Manual page 376

2-352
Features and Operation
Programming Steps
1. Press FLASH and dial [66]. The following message displays:
2. The TABLE 00 flexible button (Button #1) led is lit. To change tables, press the appropriate
flexible button (Buttons 2–8) and perform the following procedures.
3. Dial one of the following, when required:
[0] = If a prefix is required
[1] = If a suffix is required
[#] = If entry is to be deleted
4. Enter up to 12 digits, including [ ] and [#], TRANS button = pause.
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To clear entries in a table:
Press the pound key once [#], followed by HOLD.
STARPLUS STSe - Programming & Operations Manual
Entries are not required in the Outpulsing Table. However, a table must be
referenced when setting up the Voice Mail groups for the system to send digits
to the voice mail.
VO IC E PR E
M A IL Y SUF
Y = Table Index (0–7)
X = Entered Digits (0–9, #,
Voice Mail Outpulsing Table
XXXXXXXXXXXX E
XXXXXXXXXXXXE
, Pauses)
August 2005