Lcd Interactive Display - Vodavi STARPLUS STSe Operation Manual

2-216
Features and Operation
»
Handset must be in cradle.
»
ON/OFF button must be set to OFF.

LCD Interactive Display

Description
The STSe Digital Telephone provides you with a visual indication of call status and other
information. Calls to and from other extensions, number dialed, line used, and Camp On are
some of the items displayed.
based on the function performed.
The three Soft Keys provide an ability to access commonly used features without having to
preprogram those functions on a flexible button or use fixed buttons. Soft Key use is in
conjunction with the LCD interactive displays.
Non-Soft Key LCD Displays
Each display is arranged into upper and lower fields.
The upper field shows the current activity of the telephone.
The lower field is divided into two sections:
- The left section of the lower field shows either the date, speed bin number, connected
intercom station, or outside line number.
- The right section of the lower field shows the current time or elapsed time on an
outside call.
Soft Key LCD Displays
Soft Key functions and corresponding LCD displays vary, dependent upon the telephone
operating mode, e.g., idle mode, during a conference, active CO line call, or intercom call to a
busy station.
When you use Soft Keys while in an idle mode, the following principles apply:
1. Press the right Soft Key to display the first two options.
2. Continue to press the right Soft Key to scroll through two additional options at a time
until the desired option appears.
3. Press the left or center Soft Key located immediately below the desired option. Certain
options require no further steps for activation, e.g., DND or Clear Forward options.
4. Dial appropriate digits as necessary to activate selected features, e.g., specific speed bin
number for speed dialing or specific personal message number.
When you use Soft Keys while in a non-idle mode:
1. Press the right Soft Key. If options exist for the current mode of operation, the option(s)
will appear on the LCD.
2. If more than two options exist, use the right Soft Key to scroll through additional options.
3. Press the left or center Soft Key located immediately below the desired option. Certain
options require no further steps for activation.
4. Dial appropriate digits as necessary to activate selected features.
STARPLUS STSe - Programming & Operations Manual
Table 2-19 on page 2-217 shows Non-Soft Key LCD displays
LCD
August 2005