Lcr Tables - Vodavi STARPLUS STSe Operation Manual

Introduction
Introduction
The Least Cost Routing (LCR) feature allows the system to automatically select the least costly
route available according to the number dialed, the time of day/day of week, the class of
service (COS) assigned to the station/trunk group priority level assigned. When a station user
dials an outside number, the LCR feature analyzes the number, then automatically chooses
an outside line from the group that is programmed as most economical.
The LCR feature puts the responsibility of choosing the least expensive route for each area
code and exchange code on the system administrator, not on the station user. In order to
make a routing decision, the LCR feature is programmed in the system database. The
successful operation of this feature is completely dependent on the accuracy of the
programming. The STSe may be programmed on a per station basis to force the use of LCR for
outgoing access. This allows the system administrator to maintain greater control over
dialing patterns and the lines used for placing outgoing CO calls.

LCR Tables

There are eight (8) different tables which are set up to monitor the dialing of digits of a
station and to select the best route programmed for the call.
3-Digit Routing Table -- allows the system to handle call routing in areas that require a 1
before a long distance number and in areas that do not require the 1 for 7-, 8-, 10-, &
11-digit dialing.
6-Digit Routing Table -- is used to determine the route for one or more office codes
programmed within the same area code.
Exception Code Table -- is used to route operator assisted calls and any other calls which
would use a one or two-digit number rather than a three-digit area code.
Route List Table -- contains four Time Period Routing Lists that are used in conjunction with
other LCR table settings.
Insert/Delete Table -- is used to add/remove digits from a number before or after it is dialed.
Daily Start Time Table -- allows the user to match the Time Periods discount structure to the
carrier's rate schedule.
Weekly Schedule Table -- allows the user to assign the Time-of-Day and Day-of-Week to use
the least costly route for a specific dialed number.
Toll Information Table -- allows common call routing for all toll information calls:
1-(xxx)555-1212, (xxx)555-1212, 1-555-1212, and 555-1212.
DEFAULT LCR Database -- provides basic routing for all local and long distance dialing.
Related Information
Flash 05
Flash 06
Flash 01
STARPLUS STSe - Programming & Operations Manual
Quick Reference
Button #7 LCR function must be enabled after LCR Tables are programmed
(refer to "Enable/Disable Least Cost Routing" on page
Button #9 LCR Call Progress feature -- To allow all users to hear digits being
dialed (refer to
Button #20 Interdigit Timeout (refer to
"LCR Call Progress" on page B-14).
"Inter-Digit Time-Out" on page
Appendix B - Least Cost Routing
B-18).
2-189).
August 2005
B-3