Relay Programming - Vodavi STARPLUS STSe Operation Manual

2-260
Features and Operation
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer,
they may repeat the step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto
Redial function is cancelled.
SINGLE LINE TELEPHONE
Not applicable
Conditions
»
Once the user presses the preprogrammed flexible button, the timer applies when the
user enters a digit. After a digit is entered, the inter-digit timer applies between the digits.

Relay Programming

Description
There is one relay on the BKSU that can be programmed to perform certain functions. These
functions are loud bell, external page control, RAN start, CO Line control, and door opener.
Programming Steps
1. Press FLASH and dial [14]. Button #1 is lit to indicate Relay #1 is selected. The following
message displays:
2. Enter one of the following sequences on the keypad:
[1] + [1] = External Page Zone
[2] +[01 through 16] = RAN Start (RAN Announcement Tables 1-16)
[3] + STA # = Loud Bell
[4] + CO # = CO Line Control
[5] = Door Opener
[0] = Disables Relay
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
STARPLUS STSe - Programming & Operations Manual
R E L AY 1 T YP E
Y Y Y Y Y Y Y Y Y Y Y Y
YYYYYYYYYYYY = Ext Page Zone, LBC Sta XXX, Ran Start XX, CO Control XX
Relay Programming
August 2005