2-206
Features and Operation
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT ... Message Exchange Timer setting is 15 seconds.
Minimum XID Retransmission
Description
The Minimum XID Retransmission setting establishes the minimum time between XID
messages. Do not change the Minimum XID Retransmission setting unless advised to do so
by Technical Support.
Programming Steps
1. Press the MIN XID RETRANSMSN flexible button (FLASH 45, Page B, Button #9).
2. Enter a valid number (0-9 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT ... Minimum XID Retransmission setting is 3 seconds.
Inter-Digit T / O
Description
Do not change the Inter-digit time out setting unless advised to do so by Technical Support.
Programming Steps
1. Press the INTER-DIGIT T/O flexible button (FLASH 45, Page B, Button #10).
2. Enter a valid number (00-99 seconds) on the dial pad.
3. Press the HOLD button. A confirmation tone sounds and the display updates.
DEFAULT ... Inter-digit Timeout setting is 25 seconds.
STARPLUS STSe - Programming & Operations Manual
MIN XID RETRANSMSN
T 2 0 4
3
IN TER -DIGIT T/ O
T 3 0 2
2 5
ISDN Programming - Page B
0-9
00-99
August 2005