Data Errors Alarm; Clear Alarm - Vodavi STARPLUS STSe Operation Manual

T-1 Alarm Programming

Data Errors Alarm

Description
Data errors are illegal bit formations. If the Data Errors Alarm is enabled, an error message is
sent to the Attendant when the data error limit is reached.
Programming Steps
1. Press the DATA ERRORS flexible button (FLASH 47, Button #7). Button #7 and Button #11
LEDs are lit steady. The following message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD button to save entry. A confirmation tone sounds and the display updates.
4. Continue to program Data Error Alarm parameters using steps provided in this section for
Clearing the alarm, Minor alarm, Major alarm, Time Period, and Attendant display.
DEFAULT ... Data Errors Alarm is enabled for all T-1 Trunks.

Clear Alarm

Description
The Clear Alarm option allows the alarm condition reported to the Attendant Display to be
cleared.
Programming Steps
1. Press the CLEAR ALARM flexible button (FLASH 47, Button #12). Button #12 LED is lit
steady. The following message displays:
2. Press the HOLD button to clear the alarm. A confirmation tone sounds.
STARPLUS STSe - Programming & Operations Manual
D ATA E R R O R S
E N AB LE D
D ATA ER R O R S
C L E AR A L A RM P R ES S HOL D
Features and Operation
0-1
2-303
August 2005