Vodavi STARPLUS STSe Operation Manual page 235

ISDN Programming - Page B
ISDN Line Parameters and Timers
ISDN ATTRIBUTES
---------------
SLOT 7
------
BRI CO TYPE
PRI CO TYPE
FRAMING
NT/TE MODE
POWER
DIRECTORY NUMBER
MAX OUT I-FRAMES
LEADING 1
LEADING 011
7/8
10 DIGIT NUMBER PLAN
11 DIGIT NUMBER PLAN
CALLING_NUMBER
LOOPBACK
MAX # RETRANSMSN
MAX OCTETS
MAX TEI RQST
MAX # XID RETRANSMSN N204- 3
T200
MIN TIEID CHK MSG
MIN TIEID RQST MSG
MSG EXCHANGE TIMER
MIN # XID RETRANSMSN T204- 3
INTER-DIGIT T/O
SETUP TIMER
DISCONNECT TIMER
RELEASE REQUEST
LINK DISCONNECT
CALL PROCEEDING
CONNECT REQUEST
RESTART REQ TIMER
Programming Steps
1. Press the ISDN flexible button (FLASH 85, Button #16). The following message displays:
2. To print the ISDN Parameters, press the HOLD button. The following message displays:
When the system has finished sending the requested information to the printer,
confirmation tone sounds.
STARPLUS STSe - Programming & Operations Manual
K- 1
DIGIT NUMBER PLAN
N200- 3
N201- 260
N202- 3
T201- 1
T202- 2
T203- 15
T302- 25
T303- 10
T305- 4
T308- 4
T309- 30
T310- 60
T313- 4
T316- 120
Figure 2-17: ISDN Attributes Printout
P R I NT I S D N
P R ES S H O L D
P R I NT IN G IS D N
- NI1
- NI2
- ESF
- TE
- DISABLED
-
- ENABLED
- ENABLED
- ITU
- ITU
- ITU
- ENABLED
- NORMAL
- 1
2-211
Features and Operation
August 2005