Did Digits - Vodavi STARPLUS STSe Operation Manual

Direct Inward Dialing

DID Digits

Description
The DID Digits option allows the installer to adjust the amount of DID Digits received from
the CO. This amount is used by all DID trunks in the system.
The DID Translation table can be programmed to determine the number of digits used for
the routing of a DID call.
Programming Steps
To change the number of DID Digits:
1. Press the DID DIGITS flexible button (FLASH 41, Button #3). The following message is
shown on the display phone:
2. Enter a valid number (2–7) on the dial pad which corresponds to the number of digits
used for the routing of the DID Number.
3. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
DEFAULT ... Number of DID digits is set to 3.
STARPLUS STSe - Programming & Operations Manual
At least one DTMF receiver MUST be installed in the system.
DID DIGITS
3
Features and Operation
2-7
2-123
August 2005