Speakerphone Operation - Vodavi STARPLUS STSe Operation Manual

2-274
Features and Operation
6. Enter a valid number (0-4) on the dial pad to identify the speakerphone operation.
[0]= Works as normal speakerphone. Full speakerphone capabilities on CO lines and
Intercom.
[1] = Speakerphone enabled for intercom calls only. Speakerphone capabilities disabled
for outgoing CO line calls (monitoring and on-hook dialing are still permitted).
[2] = Permits toggling of speakerphone and headset operation via [634] Headset code.
[3] = Forces the telephone to always ring in the tone intercom mode.
[4] = Forces the telephone to the hand-free intercom mode always.
7. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... All stations are assigned an ID of 0 (Full Speakerphone).
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

Speakerphone Operation

Description
The Speakerphone feature allows you to conduct a conversation without lifting the handset.
Speakerphone volume can be adjusted as desired.
Operation
1. Press ON/OFF button to ON. Intercom dial tone sounds.
2. Press the Volume Bar to change the tone volume. The following message displays:
3. Press the party's DSS button, or press an available outside line button and dial the
number. Speakerphone is activated.
4. Press ON/OFF button to OFF to end the call.
SINGLE LINE TELEPHONE
Not applicable
STARPLUS STSe - Programming & Operations Manual
S P E AK ER TON E
M MM DD Y Y
Where lift handset is specified, you may also press the ON/OFF button, if the
telephone is programmed as a two-way speakerphone.
[#########]
H H : MM a m
Speakerphone
August 2005