Attendant Speed Dial - System Storing - Vodavi XTS Station User Manual

Attendant Features

Attendant Speed Dial - System Storing

System Speed numbers must be entered by the first programmed
Attendant. If an Attendant is not specified, enter at Station 100.
1. Press SPEED once, then press the desired outside line key,
-or-
Press SPEED twice to select an outside line automatically.
2. Dial the System Speed bin location (9020-9999 or
9020-9099 for
3. Dial telephone number.
4. Press SPEED.
5. Hang up.
Speed Dial Options
To use the following speed dial options, enter as shown:
Initiate a Pulse-To-Tone
Switchover
Insert a Pause
Insert a Flash into the
Speed Number
Insert a Non-Display
Character
XTSc
).
Press TRANS during number entry.
Press HOLD during number entry.
Press FLASH.
Press TRANS as the first entry in the
speed bin.
This causes the numbers stored in the
bin not to display on the Digital
Telephones when the bin is accessed.
Speed Bin numbers 9060-9099 are not monitored by Toll
Restriction.
27