Executive Override Warning Tone - Vodavi STARPLUS STSe Operation Manual

2-156
Features and Operation

Executive Override Warning Tone

Description
The Executive Override Warning enables Executive stations to override and barge-in on other
key sets engaged in conversation on a CO line. Prior to actual cut through of the third party, a
warning tone is presented to all parties notifying them of the barge-in. This warning tone,
however, is a programmable option on a system-wide basis, that either enables or disables
the tone. When tone is disabled, no audible signal is presented to parties to signal barge-in.
Programming Steps
1. Press the EXEC OVER WARN TONE flexible button (FLASH 05, Button #4).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Executive Override Warning Tone is enabled.
STARPLUS STSe - Programming & Operations Manual
Use of this feature when the Executive Override Warning Tone is disabled may be
interpreted as a violation of federal, state, or local laws, and an invasion of privacy.
Check applicable laws in your area before intruding on calls using this feature.
A change in volume may occur on the CO line or intercom call after the barge-in
occurs.
E X ECU T IV E WA R NI N G
E N AB LE D
Executive Override
0-1
August 2005