Station Message Detail Recording
Character Print Assignment
Description
The system can be programmed to print individual SMDR records in either a 1-line
80-character format or a 3-line 30-character format.
Programming Steps
1. Press PRINT FORMAT flexible button (FLASH 21, Button #3) to determine the print
format of SMDR records. This feature toggles on and off each time the button is pressed.
The display updates with each toggle.
LED On = 80-Character is enabled
LED Off = 30-Character is enabled
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... The 1-line 80-character format is selected.
Baud Rate Display
Description
The STSe system provides SMDR output to the standard RS-232C connector on the optional
BKSU. The baud rate is displayed as 150, 300, 600, 1200, 2400, 4800, 9600, or 19.2K baud.
Programming Steps
The SMDR Baud Rate is programmed using Flash 15, Baud Rate Assignments. The LCD
displays the current baud rate based on which port is assigned to the SMDR Port number.
SMDR Port Assignments
Description
PORT #1-- RS-232C port on the BKSU
PORT #2 -- RS-232C port on the BKSU
PORT #3 -- modem
Programming Steps
1. Press the PORT flexible button (FLASH 21, Button #5) to determine which port to use for
SMDR information.
2. Enter a valid number for the SMDR Port number:
[1] = Port #1
[2] = Port #2
The LCD displays the current baud rate based on which Port number is assigned to the
SMDR Port number.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Port #1.
STARPLUS STSe - Programming & Operations Manual
2-289
Features and Operation
August 2005