Paging
Paging Time-Out Timer
Description
The Paging Time-Out Timer determines the maximum length of a page announcement
(internal, external or all call). The system automatically disconnects the page at the end of this
time unless the person making the page has already hung up.
The Paging Time-out Timer setting is variable from 01–60 seconds. A 00 entry disables the
timer and pages are not limited in length. This affects the use of the Meet Me Page feature.
Programming Steps
1. Press the PAGING TIMEOUT TIMER flexible button (FLASH 01, Button #10). The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 01-60 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Paging Time-out Timer is set at 15 seconds.
Page Warning Tone
Description
The Page Warning Tone determines whether a page warning tone sounds over the Key
Telephone speakers or external paging speakers, prior to a page announcement.
Programming Steps
1. Press the PAGE WARN TONE flexible button (FLASH 05, Button #5).
2. Enter a valid number (0 or 1) that corresponds with the following:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Page Warning Tone is enabled.
STARPLUS STSe - Programming & Operations Manual
PAG IN G T I ME OUT
1 5
PAG E WA RN I NG TON E
E N AB LE D
Features and Operation
00-60
0-1
2-245
August 2005