Co Line Assignments For Tenant Groups - Vodavi STARPLUS STSe Operation Manual

2-314
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press button #22. The display updates to reflect current programming for Page D.
Flash 50 - Fixed Numbers
XXX - XXX PAGE D
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
5. Press Button #1 and the following displays:
6. Enter a valid number 0-9 to assign the station(s) to a Tenant Group 0-9 respectively.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All stations are assigned to Tenant Group 0.

CO Line Assignments for Tenant Groups

Description
When a particular Tenant Group member dials 9 to access a CO line, that member has access
to CO lines based on what is programmed in this feature.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
STARPLUS STSe - Programming & Operations Manual
T E NA NT GR O UP
0
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO range, all CO lines are selected.
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S XXX PAG E D
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-9
Tenant Groups
August 2005