Voice Mail - Vodavi STARPLUS STSe Operation Manual

Voice Mail

Voice Mail
Description
Up to eight Voice Mail groups can be configured in the STSe system. Each group can contain
up to 24 Voice Mail designated ports, each of which interfaces with a port on an SLT card (or
DTIB if using a Digital Voice Mail).
An externally provided Voice Mail system or Auto Attendant must be connected to the
STSe system for Voice Mail or Auto Attendant operation. Voice Mail automatically handles
unanswered calls. Station user can then retrieve messages left at their stations.
Auto Attendants can handle incoming calls and route callers to station users without
intervention from the systems Attendant. Direct incoming ring to Voice Mail/Auto Attendant
groups can be done directly through CO Line Ringing Assignments.
Programming Steps
1. Press FLASH and dial [65]. The following message displays.
The top left button in the flexible button field is lit for programming Voice Mail Group
440.
2. To change Voice Mail groups or enter further voice mail groups, press the appropriate
flexible button 1-8 (440–447) and perform the following procedures.
DEFAULT ... No voice mail stations are assigned.
STARPLUS STSe - Programming & Operations Manual
V XXXX
E N TE R B UT TON NUMB ER
XXXX = 3- or 4-digit flexible voice mail group number
If installing a Vodavi voice mail system (except MiniVoice), skip directly to
Button 12 and enter voice mail ports.
Certain programming is required in the Voice Mail system connected to the STSe
system for proper operation.
Tone Mode Calling option (6#) must be programmed as leading digits in
transfer sequence(s) of Voice Mail system to force tone ringing to key
telephones in the handsfree mode.
2-333
Features and Operation
August 2005