Preset Forward Timer (Incoming Call To A Destination) - Vodavi STARPLUS STSe Operation Manual

2-120
Features and Operation

Preset Forward Timer (Incoming Call to a Destination)

Description
The Preset Forward Timer will begin when a call is routed via the route table. If the timer
expires before a ringing destination answers, the call will forward to the appropriate
destination as programmed in Flash 43, Buttons #2-4.
Programming Steps
1. Press FLASH and dial [43]. The Button #1 LED is illuminated and the following message
displays:
2. Enter a valid number for the route to be programmed.
3. Press the PRESET FWD DAY TMR flexible button (Button #6). The following message
displays:
4. Enter valid number on dial pad which corresponds to 00–99 seconds.
5. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Preset Forward Day Timer is set at 10 seconds.
6. Press the PRESET FWD NGT TMR flexible button (Button #11). The following message
displays:
7. Enter valid number on dial pad which corresponds to 00–99 seconds.
8. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Preset Forward Night Timer is set at 10 seconds.
9. Press the PRESET FWD SPL TMR flexible button (Button #12). The following message
displays:
10. Enter valid number on dial pad which corresponds to 00–99 seconds.
11. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Preset Forward Special Timer is set at 10 seconds.
STARPLUS STSe - Programming & Operations Manual
R O U T E 00 0 D DD D RR
000 = Route Number ( 000-251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
P R ES E T F W D D AY T M R
1 0
P R ES E T F W D NG T T MR
1 0
P R ES E T F W D S PL T MR
1 0
Direct Inward Dialing
00-99
00-99
00-99
August 2005