Conference Combinations - Vodavi STARPLUS STSe Operation Manual

Conference
Programming Steps
1. Press the CONFERENCE/DISA TIMER flexible button (FLASH 01, Button #9). The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 01-99 minutes.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Conference/DISA Timer is set at 10 minutes.

Conference Combinations

Description
Only stations that have conference enabled can institute a conference.
Add-On Conference -- Up to eight internal parties can engage in a conference, or seven
internal parties with one external party.
Multi-Line Conference -- One internal station can engage in a conference with up to five
outside parties.
Capacities
The total number of conferences that can be conducted simultaneously system-wide
depends upon several factors. The following table shows the system capacity for conferences
using specific amounts of parties per conference. Multiple conference capacity
configurations are possible. For example, you could have one 8-party conference and five
3-party conferences simultaneously.
Operation
To establish a Conference:
1. Lift handset, then select intercom station or dial desired outside party.
2. When called party answers, press the CONF button.
3. Add next conference party by selecting another outside line or intercom station or by
using the Soft Key's ADD MEM option.
4. If the next conference party is an outside line and a busy or wrong number is
encountered, press one of the conference parties on hold. This drops the busy or wrong
number party. Press the conference button again and repeat step 4.
5. When last party answers, press the CONF button twice (all parties are connected).
STARPLUS STSe - Programming & Operations Manual
CONFE R EN CE T IM ER
1 0
Parties per Conference
3 or 4
5
6
7 or 8
A maximum of eight parties can be included in a conference.
00-99
Maximum Conferences
10
5
3
2
2-103
Features and Operation
August 2005