Voice Mail In-Band Features; In-Band Signaling Integration - Vodavi STARPLUS STSe Operation Manual

Voice Mail In-Band Features

Programming Steps
1. Press the VOICE MAIL GROUP flexible button (FLASH 85, Button #13). The following
message displays:
2. To print data for Voice Mail Group Parameters, press HOLD. The following displays:
When the system finishes sending the requested information to the printer, a
confirmation tone sounds.
Voice Mail In-Band Features

In-Band Signaling Integration

Description
The STSe allows programming so that if a station programmed to receive incoming CO line
ringing is forwarded to Voice Mail, they may have incoming callers routed directly into their
station's voice mail box through the use of In-Band signaling. Alternately, incoming CO lines
can be programmed to ring directly into the Voice Mail system. In this case, callers are
answered by the Voice Mail or Auto Attendant Main greeting.
Incoming CO callers can be call forwarded into Voice Mail automatically, if a Preset Forward
Destination is programmed for that CO line and the same CO line programmed to ring at one
station. CO lines may also be programmed to ring at an Attendant station, call forward into
the Voice Mail system (if programmed to ring at one Attendant station) and presented to the
main greeting (not the Attendant station's mailbox - except in the case of DID. DID digits are
sent to the VM) even when ID digits are enabled.
Entries into the Voice Mail In-Band Features determines the in-band signaling required for
ICID Incoming ID Digits (forwards incoming CO callers directly to a Station's Voice Mailbox),
and Forward to VM Groups (lets voice mail calls, upon reaching a forwarded to VM station,
forward back into the voice mail system).
Programming Steps
Press FLASH and dial [67]. The following message displays:
STARPLUS STSe - Programming & Operations Manual
P R I NT V M GR O U P
P R ES S HOL D
P R I NT IN G V M GR O U P
VM FEATURES
E N TE R B UT TON NUMB ER
2-345
Features and Operation
August 2005