Incoming Co Line Ringing - Setting Flash Rate - Vodavi STARPLUS STSe Operation Manual

2-80
Features and Operation
To add multiple stations:
Enter: DDDDR HOLD DDDDR HOLD DDDDR HOLD...etc.
(Example: 10073 HOLD, 10083 HOLD, 10093 HOLD)
To delete a single station:
Enter: DDDD0 HOLD
(Example: 10080 HOLD)
To delete multiple stations:
Enter: DDDD0 HOLD DDDD0 HOLD...etc.
(Example: 10080 HOLD, 10090 HOLD)
DEFAULT ... All CO lines ring at the Attendant, Station 100 during Day and Night Modes.

Incoming CO Line Ringing - Setting Flash Rate

Description
The Incoming CO Line Ringing flash rate is the rate at which an Incoming CO line or Loop
Button flashes. This flash rate can be programmed to 29 different options identified in the
flash rate table, which enables the programmer to customize the key system configuration to
desired flash rates.
Programming Steps
1. Press the INC CO RING flexible button (FLASH 07, Button #1). The following message
displays:
2. Enter a valid number (00-28) on the dial pad that correspond to one of the 29 available
options (refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Incoming CO Ringing flash rate is set for RED 480 ipm Flutter (08).
STARPLUS STSe - Programming & Operations Manual
I N C CO R I NG
RED 480 IPM FLUT TER
Table 2-16 on page 2-163).
CO Line - Incoming Ringing Assignment
00-28
August 2005