Pause Timer - Vodavi STARPLUS STSe Operation Manual

Pause Timer

5. Press the PAGE ZONE flexible button (Button #6). The following message displays:
6. Enter a valid number (01-20) to program Paging Zone(s).
[01] = Zone 1
[02] = Zone 2
[03] = Zone 3
[04] = Zone 4
[05] = Zone 5
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All stations are in Zone 1.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Pause Timer
Description
When dialing a speed number, a timed pause between digit sending can be placed in the
number. The length of this pause can be programmed in the system database.
The Pause Timer determines the length of the pause when programmed for use with speed
dialing and LCR Insert Tables. The Pause Timer setting is variable from 1–9 seconds. There is
no 0 entry. Using this feature may affect Centrex transfers.
Programing Steps
1. Press the PAUSE TIMER flexible button (FLASH 01, Button #7). The following message
displays:
2. Enter a valid number on the dial pad that corresponds to 1-9 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Pause Timer is set at 2 seconds.
STARPLUS STSe - Programming & Operations Manual
PAG E ZONE
1
[06] = Zone 6 [11] = Zone 11
[07] = Zone 7 [12] = Zone 12
[08] = Zone 8 [13] = Zone 13
[09] = Zone 9 [14] = Zone 14
[10] = Zone 10 [15] = Zone 15
PAU SE TI M ER
2
Features and Operation
01-20
[16] = Zone 16
[17] = Zone 17
[18] = Zone 18
[19] = Zone 19
[20] = Zone 20
1-9
2-247
August 2005