Vodavi STARPLUS STSe Operation Manual page 498

C-32
Flash-Based Voice Mail
Selecting an STSe Numbering Plan -- Use the arrow keys to scroll to the desired number
corresponding to the desired numbering plan, then press the <ENTER> key. Your selection is
displayed in the Screen in Effect field.
For example, if you scroll to 00 for Vodavi STSe 3 Digit numbering plan and press <ENTER>,
the Screen In Effect field displays 00.
Changing a Parameter --
In cases where you need to change a parameter used by the PBX integration screen, perform
the following steps:
1. Use the arrow keys to scroll to select your PBX integration, then press the <ENTER> key.
2. Press the <ENTER> key a second time to display the next PBX Integration Screen.
PBX Integration Programming - (Sub Menu)
Review
description
in following
table
Field
PBX CODE
NAME
STARPLUS STSe - Programming & Operations Manual
It is only necessary to select the specific STSe numbering plan as shown in
16. Parameters for the selected STSe numbering plan (shown in
need to be modified unless under the direction of Technical Support personnel.
Changing from one PBX integration to another will wipeout all of the existing
mailboxes and there is no way to recover them.
Figure C-17: PBX Integration Screen (2 of 2)
Number the system uses to determine which PBX screen to reference for system
parameters.
Example -- If 01 is selected as the PBX Integration, the system will use the entries located on
screen 01 to determine integration patterns, MWI on & off codes, etc.
Descriptive name used to visually identify the particular Integration Screen. This name is
the one displayed in the PBX Integration Selection Menu.
Programming the Voice Mail System
Description
Figure C-
Figure C-17) do not
August 2005