Music-On-Hold (Per Co Line) - Vodavi STARPLUS STSe Operation Manual

2-228
Features and Operation
Programming Steps
1. Press MUSIC-ON-HOLD flexible button (FLASH 05, Button #12). Feature toggles on/off
each time button is pressed; and the display updates.
[0] = Disabled
[1] = Enabled
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Music-On-Hold is enabled.

Music-On-Hold (per CO Line)

Description
The Music-On-Hold feature allows a user to select the Music-On-Hold channel for each CO
line. This feature lets the system assign CO line circuits as additional music inputs. This
increases the capacity of music channels beyond the one available on the first installed card
in the BKSU. Up to seven channels are available for use on the system. The CO line can be
assigned to NOT PLAY music for callers on hold.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
STARPLUS STSe - Programming & Operations Manual
M U S IC O N H O L D
E N AB LE D
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE B
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
Music-On-Hold
0-1
August 2005