Recorded Announcement Tables - Vodavi STARPLUS STSe Operation Manual

Programming the Voice Mail System

Recorded Announcement Tables

Description
The Hard Drive-based Voice Mail can be used as a RAN Announcer for UCD Groups. A RAN
mailbox is provided to play the announcement.
This feature establishes the type, index (port) number and message length for the eight
available Recorded Announcements (RAN). There are eight RAN Tables that can be
programmed. Table 1 can be the answer port for unanswered incoming calls to a UCD group.
Programming Steps
If Recorded Announcement (RAN) devices are installed to operate with UCD, these tables
must be programmed.
To program a Table for the Hard Drive-based Voice Mail:
1. Press FLASH and dial [62]. The following message displays:
The top left button in the flexible button field is lit for programming UCD RAN
Announcement Table #1.
2. To change to another UCD RAN Announcement Table, press FLASH 62 and a flexible
button 2-8 for Tables 2-8 respectively.
3. Dial [4] for the Voice Mail function.
4. Dial the desired Voice Mail Group number, using a 4-digit format, e.g., for Voice Mail
Group 440, enter 0440.
5. Dial a RAN mailbox number:
[0] + [801-816] for a three-digit numbering plan,
-or-
[8001-8016] for a four-digit numbering plan.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To clear entries:
1. Press the [#] button.
2. Then press HOLD.
STARPLUS STSe - Programming & Operations Manual
A N NOU N C E ME NT TA B L E 1
T YP E # I DX # ## #
To program a Table for a Digital Voice Mail, a CO Line port, an SLT port, or a
RAN Hunt Group port, refer to
Hard Drive-Based Voice Mail
T I ME # ##
"Recorded Announcements" on page
D-5
4-9.
August 2005