Smdr Enable/Disable; Long Distance - All Calls - Vodavi STARPLUS STSe Operation Manual

2-288
Features and Operation
The STSe system can provide SMDR output to the optional RS-232C connectors on the BKSU.
Programming Steps
1. Press FLASH and dial [21]. The following message displays:
2. To program SMDR features, use the flexible button(s) as defined in the following
procedures.
3. The ENABLE/DISABLE, TYPE, and PRINT features toggle on and off each time the button is
pressed. The display updates with each toggle.
4. After all entries are made, press HOLD to save the entry. A confirmation tone sounds.

SMDR Enable/Disable

Description
A call accounting device can be installed allowing the system to track calls by outside line
number, number dialed, time of day, date, station that placed or received the call, and
duration of the call.
Programming Steps
1. Press the ENABLE/DISABLE flexible button (FLASH 21, Button #1). This feature toggles
on and off each time the button is pressed. The display updates with each toggle.
LED ON = SMDR is enabled
LED OFF = SMDR is disabled
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... SMDR is disabled.

Long Distance - All Calls

Description
The system can be set to record all outgoing calls or only outgoing long distance calls. Long
Distance calls are defined as beginning with a 1 or 0, or containing eight or more digits.
Incoming calls are only recorded if TYPE is set for all calls.
Programming Steps
1. Press the CALL TYPE flexible button (FLASH 21, Button #2) to determine the type of calls
to record. This feature toggles on and off each time the button is pressed. The display
updates with each toggle.
LED ON = Long Distance is enabled
LED OFF = All Calls is enabled
2. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... System records long distance (LD) calls only.
STARPLUS STSe - Programming & Operations Manual
S D R T PE P N T B AU D P O R T
N O L D 8 0 9 6 0 0
Station Message Detail Recording
1
August 2005