Vodavi STARPLUS STSe Operation Manual page 301

Speed Dial
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press the SPEED flexible button (Button #6). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... System Speed Dialing is enabled at all stations.
Operation
The first programmed Attendant uses the same procedures to store system speed dial
numbers, program multiple speed dial numbers, and to erase existing speed bins as
described in the operation of station speed dial numbers.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, all stations are selected.
S YS T EM S P E ED
E N AB LE D
Flash 51 - Flexible Numbers
EN TE R S TAT I O N N U MBE R
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-1
2-277
Features and Operation
August 2005