Co Direction - Vodavi STARPLUS STSe Operation Manual

CO Line - Ringing Options

CO Direction

Description
CO Lines can be programmed on a per CO Line basis for the type of CO Line desired:
Incoming
Incoming restricts the CO Line for incoming calls only.
Users can place call on hold, park the call, and other stations can pick up the call.
Outgoing
Outgoing restricts the CO Line to outgoing calls only.
Users can place call on hold, park the call, and other stations can pick up the call.
Incoming and Outgoing
Incoming and outgoing type allow calls to be received or dialed out.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the CO DIRECTION flexible button. (Button #12). The following message displays:
5. Enter a valid number (0-3) on the dial pad which corresponds to the desired CO type:
[0] = Out-of-Service (OOS)
[1] = Incoming Only
[2] = Outgoing Only
[3] = Both Incoming and Outgoing
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All CO Lines default to both incoming and outgoing type.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
CO D I R ECT IO N
I N COM I NG - O UTG OI NG
Features and Operation
0-3
2-97
August 2005