Hold - Preference
Exclusive Hold Recall Timer
Description
The System Hold Recall Timer determines the time before a call placed on Exclusive Hold
recalls the station placing the Hold. If unanswered by that station, the call recalls the
Attendant.
The Exclusive Hold Recall Timer setting is variable from 000-300 seconds. An entry of 000
disables the timer and there is no recall.
Programming Steps
1. Press the EXCLUSIVE HOLD RECALL TIMER flexible button (FLASH 01, Button #2). The
following message displays:
2. Enter a valid number on the dial pad that corresponds to 000-300 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Exclusive Hold Recall Timer is set for 180 seconds.
Hold - Preference
Description
The Hold Preference feature allows either System or Exclusive hold as the primary hold on the
first depression of the HOLD button, depending upon programming. A second depression
invokes the second hold preference.
Programming Steps
1. Press the HOLD PREF flexible button (FLASH 05, Button #2).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Exclusive Hold
[1] = System Hold
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Hold Preference is System Hold.
STARPLUS STSe - Programming & Operations Manual
E XC H O L D R EC AL L
1 8 0
H O L D P R EFE R EN C E
S YS T EM
000-300
0-1
2-177
Features and Operation
August 2005