Vodavi STARPLUS STSe Operation Manual page 177

Executive Override
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press the EXECUTIVE OVERRIDE flexible button (Button #4). The following displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Executive Override is disabled for all stations.
Operation
To use Executive Override, when calling a busy station:
1. Press the preprogrammed EXECUTIVE OVERRIDE button (The programming code is 625).
Executive station is bridged onto the CO line conversation in progress at the called
station. An optional warning tone is presented to all parties prior to cut-through.
2. Replace handset at Executive station to terminate the override.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, all stations are selected.
E X EC O V ER RI D E
D I S A B LE D
Use of this feature when the Executive Override Warning Tone is disabled may be
interpreted as a violation of federal, state, or local laws, and an invasion of
privacy. Check applicable laws in your area before intruding on calls using this
feature.
A change in volume may occur on the CO line or intercom call after the
barge-in occurs.
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-1
2-153
Features and Operation
August 2005