Call Forward - No Answer - Vodavi STARPLUS STSe Operation Manual

Call Forward
Conditions
»
If a Call Forward mode is currently active at the station where forwarding is desired, the
new forward becomes active and cancels the previous forward.
»
Both internal and external calls to the affected station forward to the designated location.
»
Call forwarding must be allowed in programming for the affected station.
»
When remote forward is activated, the forwarding is immediate.
»
A station's Call Forward status is stored in a battery protected area of memory. A station's
Call Forward status is returned after a power failure or system reset occurs.
»
When a key telephone is forwarded remotely, the key station's forward button lights.
The station user may cancel forwarding at their station by pressing ON/OFF, then FWD.
SLT users can cancel their forwarding by going off hook and dialing the forward code.
»
DISA callers entering the code and making a mistake are given error tone for 3 seconds,
silence for 2 seconds, then the dial tone is returned.

Call Forward - No Answer

Description
The Call Forward No Answer feature allows a station the ability to have their calls forwarded
to a designated station, a UCD group pilot number, Voice Mail group number or Hunt group
number when there is no answer at the station. No answer calls forward when the No Answer
Timer expires.
Operation
To activate No Answer Call Forwarding:
1. Lift the handset or press ON/OFF button, press the FWD button or dial [640] on the dial
pad, then dial the Call Forward No Answer code [7] on the dial pad.
-or-
Use the Soft Key's N/A-FWD option when in an idle condition.
2. Dial the desired destination number where calls are to be forwarded. A confirmation tone
sounds.
3. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
To remove No Answer Call Forwarding:
1. Lift handset or press ON/OFF button.
2. Either press the FWD button, dial [640] or [662], or use the Soft Key's CLR-FWD option. A
confirmation tone sounds and the FWD LED extinguishes.
3. Replace handset; ON/OFF button extinguishes automatically, if used instead of handset.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in Digital Telephone operation
described above, except there is no FWD button or Soft Keys. The user must use the feature
codes as described in the keyset section above.
STARPLUS STSe - Programming & Operations Manual
2-31
Features and Operation
August 2005