2-54
Inter-Digit Time-Out
The Inter-Digit Time-Out feature allows programming of the inter-digit
time-out on a system-wide basis. This feature applies to intercom and
LCR calls. DISA inter-digit time-out remains unaffected by this timer.
Keyset Mode (Digital KTU Only)
The Keyset Mode feature allows the station user to determine the mode
in which the Digital Telephone with CTI Box (optional) operates. The five
modes are: Inactive mode, PC Phone
Command mode, ATH Command mode and CKTU mode. Through the
use of a dial code, the station user can also determine the baud rate for
each mode selected. This setting is stored in back-up memory in the
event of a power outage or system reset.
Last Number Redial (LNR)
The Last Number Redial feature permits the automatic redialing of the
last telephone number dialed on an outside line. Up to 24-digits can be
stored. Outside line selection of the same line used is automatic.
LCD Interactive Display
The Executive Digital Telephone provides the user with visual indication
of call status. Calls to and from other extensions, number dialed, line used
and camp-on are some of the features displayed.
Inter-Digit Time-Out
(Discovery
Desktop) mode, ATD