Chapter 10: Interface mode commands
switchport
Use this command to configure an interface as a Layer 2 interface. Also use this command to
create an access port.
Syntax
switchport
Example
AG/configure/interface/ethernet (6/1)# switchport
no switchport
Use this command to disable a configured link (trunk, access, or hybrid) on an interface.
Syntax
no switchport
Example
AG/configure/interface/ethernet (6/1)# no switchport
switchport mode hybrid
A hybrid link is a LAN segment that contains both VLAN-aware and VLAN-unaware devices.
Consequently, a hybrid link can carry both VLAN tagged frames and other (untagged or priority-
tagged) frames.
Use this command to enable a hybrid link between devices.
Syntax
switchport mode hybrid
Command Line Reference
August 2013
95