Table of Contents
Advertisement
Configuring the G150 Media Gateway with Manager
3. The Extension field contains the extension number assigned to this user.
Information in this field MUST match the station | extension field in the Communication
Manager configuration.
This field is not amendable within this configuration. If it needs to be updated, refer to
Extension Numbering within G150
4. In the Password field, enter the password for this user. Maximum password length is 7
characters.
This password MUST match the station | security Code field in the Communication
Manager configuration.
The password is ONLY used for registering this user with Communication Manager. The
actual telephone user will not have to enter this information at any time.
5. All other field on this window should be left at their default unless there are special
requirements.
6. Click OK.
7. Repeat the above steps until all users and passwords are configured.
8. If this is the last configuration being performed on Manager, click
Config To dialog box, accept the selected save option and click OK. Otherwise, continue
making additional configuration updates and perform a Save when ready.
To finish registering this user on Communication Manager, configuration on the Communication
Manager is required. If this has not already been performed, see
Manager Administration for the Avaya G150 Media Gateway
Communication Manager.
Dial Plan Support in Survivable Mode
The G150 supports a survivable call routing/dial plan consisting of the following:
Extension numbering
Group membership
Hunt Group mode
Call routing
122 Installation and Configuration of the G150 Media Gateway
on page 120.
for information on configuring
Save. In the Sending
Chapter 2: Communication
Advertisement
Table of Contents
