Steering Linkage-Tie Rod - Ford Transit 2002 Owner's Manual

Steering Linkage - Tie Rod
Removal and Installation
Special Tool(s)
Socket, Tie-Rod End, Steering Gear
211-245 (13-025)
General Equipment
Pipe wrench
Vise jaw protectors
Pincers
Materials
Name
Grease
Specification
ESB-M1C119-B
Removal
1. Remove the steering gear. For additional
information, refer to Section
Steering.
NOTE: Make a note of the number of turns
2.
used to remove the tie-rod end.
Remove the tie-rod end and the tie-rod end
locknut.
1. Remove the tie-rod end.
2. Remove the tie-rod end locknut.
NOTE: Make sure the tie-rod is clean before
3.
removing the steering gear boot.
Remove and discard the steering gear boot
clamps.
4. Remove and discard the steering gear boot.
5. Rotate the steering gear pinion to expose the
rack.
http://vnx.su
Transit/Tourneo Connect 2002.5 (06/2002-)
211-02 Power
Print