Engine-1.8L Duratec-Dohc (85Kw/115Ps)-Zetec-Valve Clearance Adjustment - Ford Transit 2002 Owner's Manual

Engine - 1.8L Duratec-DOHC
(85kW/115PS) - Zetec - Valve Clearance
Adjustment
General Procedures
Special Tool(s)
Compressor, Valve Adjustment
303-563 (21-218)
General Equipment
Feeler gauges
Transit/Tourneo Connect 2002.5 (06/2002-)
1. Remove the valve cover.
For additional information, refer to
in this section.
CAUTION: Only turn the engine in the
2.
normal direction of rotation.
Turn the engine until each piston is at top dead
center (TDC) and measure the valve clearances.
3. NOTE: Note down each cylinder number and
the valve clearances measured.
Using a suitable set of
the valve clearances.
NOTE: Only carry out the following steps
4.
when the valve clearance must be adjusted.
For additional information, refer to
Specifications in this section.
Install the special tool.
5. NOTE: The number on the shim indicates the
shim thickness.
Remove the adjusting shim from the tappet and
read the thickness from the underside.
http://vnx.su
Print
Valve Cover
feeler gauges, measure