Ford Transit 2002 Owner's Manual page 697

13. NOTE: Position the cylinder head on wooden
blocks.
Using the special tools, remove the valve
springs.
1. Using the special tools, compress the
valve springs.
2. Using the special tool, remove the valve
collets.
Remove the valves, valve collets and the
valve springs and position them in order
to one side.
14. Using the special tool, remove the valve seals.
Assembly
1. Grind in the valves.
CAUTION: Protect the grooves on the
2.
valve stems with protective sleeves.
NOTE: Only remove the protective sleeves
after the valve stem oil seals have been
installed.
Coat the new valve seals with
install them.
3. Coat the valves with
4. Install the valve springs.
Install the valve springs with the valve
spring retainers.
1. Using the special tool, compress the valve
springs.
2. Install the valve collets into the grooves
on the valve stem.
5. NOTE: The lettering on the valve
adjustment shims faces downwards.
NOTE: Coat the valve tappets and the valve
adjustment shims with engine oil before
installation.
NOTE: Installation sequence.
Install the valve tappets.
http://vnx.su
engine oil and
hypoid oil and insert them.