Ford Transit 2002 Owner's Manual page 588

NOTE: To aid installation of the high-pressure
fuel supply line, the unions at the fuel rail
end are colored gold.
NOTE: Install new fuel injector high-pressure
fuel supply lines.
NOTE: Do not fully tighten the fuel injector
high-pressure fuel supply line unions at this
stage.
Install the fuel injector high-pressure fuel supply
lines in the sequence shown.
Remove and discard the blanking caps.
Install the unions finger tight.
9. CAUTIONS:
Remove the blanking caps from the
high-pressure fuel supply lines, the fuel rail
and fuel pump at the last possible moment.
Failure to follow this instruction may result in
foreign material ingress to the fuel injection
system.
Do not allow the unions to hit the ends
of the high-pressure fuel supply line. Failure
to follow this instruction may result in
damage to the ends of the line and allow
foreign material to enter the fuel injection
system.
NOTE: Install a new fuel rail high-pressure
fuel supply line.
NOTE: Do not fully tighten the fuel rail high-
pressure fuel supply line unions at this stage.
Install the fuel rail high-pressure fuel supply line.
Remove and discard the blanking caps.
Install the unions finger tight.
10. Tighten the fuel supply manifold retaining
bracket upper retaining bolts.
11. Tighten the fuel supply manifold retaining
bracket lower retaining bolt.
12. Tighten the fuel injector high-pressure fuel
supply lines and the fuel rail high-pressure fuel
supply line unions in the sequence shown.
http://vnx.su