Ford Transit 2002 Owner's Manual page 954

Item 5 : High-pressure fuel supply line to fuel injection supply manifold union
CAUTIONS:
Do not allow the unions to hit the ends of the high-pressure fuel supply line. Failure
to follow this instruction may result in damage to the ends of the line and allow foreign
matter to enter the fuel injection system.
Remove the blanking plugs from the high-pressure fuel supply line, the fuel pump
and the fuel injection supply manifold at the last possible moment. Failure to follow this
instruction may result in foreign matter ingress to the fuel injection system.
NOTE: Do not tighten the high-pressure fuel supply line unions until both unions are
installed.
NOTE: Maintain pressure on the high-pressure fuel supply line to keep the line in contact
with the fuel pump and fuel injection supply manifold cones while installing the unions.
Item 4 : High-pressure fuel supply line to fuel pump union
CAUTION: Make sure the tool used to tighten the high-pressure fuel supply line
unions is used at the top of the union as this is where there is most material. Failure to
follow this instruction may result in damage to the union.
NOTE: When both high-pressure fuel supply line unions have been installed, the fuel
supply line union to fuel pump should be tightened first.
1. Discard the blanking plugs.
1. Tighten the high-pressure fuel supply line to fuel
pump union and the high-pressure fuel supply
line to fuel injection supply manifold union.
http://vnx.su